SILVER VISION

Acrylic paint Silver VISION
Deep matt, with silver ions

Properties: silver ions are used in composition of paint, thanks to which the surface painted with Silver VISION has properties resistant to bacteria and fungus. Contains no solvent, water-diluted paint, deep matt, light specific odour, particularly well coating, developed using binders made according to the latest technology. In addition, you will easily remove various dirt and stains from the painted surface, because the paint contains a glass ceramic particle filler that gives the paint a particularly good resistance to wet rubbing. Purpose: for painting of putty, plaster, gypsum board, wallpaper, brick masonry, concrete, various panels, and other mineral surfaces in kitchens, bathrooms and other humidity areas. It also can be used for wall and ceiling painting in children rooms, living rooms, staircases and public buildings like hospitals, health care institutions, schools, kindergartens, and food production establishments. Surface preparation: The painted surfaces must be clean, solid and dry. Moulds and other microorganisms must be removed from the surface with appropriate cleaning agents.

The paint does not remove the moulds and microorganisms from the surface, but only protects the surface against their formation. Adhesion reduction agents - grease, lubricants, dust, glue, mortar residue, aged flaking paint, chalk surfaces – must be cleaned prior to painting. Prime the weak and porous surfaces with Maiorum Vinyl DEEP. Putty the prepared surfaces with Maiorum Vinyl GRAIN. Prime with Maiorum Vinyl DEEP between putty layers if they will be rubbed. If the putty surface was rubbed, prime with Maiorum Vinyl DEEP prior to painting.

Painting conditions:: surface and ambient temperature during the work and drying must be at least +5°C, optimum conditions are at +20°C temperature and 65% relative air humidity. New cement plaster can be painted no earlier than after 14 days. Avoid direct sunlight and strong draught. Painting: it is recommended to use the paint of one batch and pigmentation for painted area. It will help to avoid various shades. Stir the paint well and dilute with water up to 5 % for the first layer, if necessary. Do not dilute paint for final layer. Paint two layers with brush, roller or sprayer. Yield: 6-8 m2/l (with two layers). Drying time: at +20°C temperature and 65% relative air humidity the paint is not sticky after 1 hour; paint repeatedly after 5 - 7 hours. Paint film gets it full firmness after at least 24 days. Tool cleaning: wash the tools with water immediately after work. Storage and transport conditions: at least +5°C and no more than +30°C temperature in a sealed container. Protect from freezing and direct sunlight! .

Environmental and occupational safety: do not pour the paint to drains, water reservoirs or soil and do not dispose them with household waste. Reduce paint waste by calculating the amount of paint required. Return the unused paint for repeated use. Repeated use of paints is an effective way to reduce the environmental impact of product life cycle. Avoid inhalation of vapour aerosol. Avoid contact with eyes, skin and clothes. In case of contact with eyes, rinse with large amount of water immediately and seek medical attention. If ventilation is not sufficient, use adequate respiratory protective equipment. If ingested, call Poison Control and Information Office or seek medical attention immediately. Keep out of the reach of children. EUH208: may cause an allergic reaction. Contains 1,2-benzisothiazol-3(2H)-one.

Volatile organic compounds: 1.1.4d) VOC limit value 10 g/l. The maximum in ready to use product 9,95 g/l..